1. Open the Finisher Door (Door K) by gently pulling it towards you.
2. Push down the lever on the stapler to release the staple cartridge holder.
3. Pull the staple cartridge holder up slightly and then straight out to remove it.
4. Remove and discard the empty staple cartridge from the holder.
5. Insert the new staple cartridge into the staple cartridge holder, making sure it is securely in place.
6. Peel off the protective tape from the new staple cartridge and discard it.
7. Lift the staple cartridge holder up slightly to clear the edge of the cartridge housing, then slide it back into its housing until it snaps into place.
8. Close the Finisher Door (Door K) by pushing it back into its original position.
For more detailed instructions, please follow the link below to be taken to Lexmark's official support page.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article