Replacing / Adding Staples to Machine

1. Open the Stapler Front Cover: Locate the front cover of your stapler and gently open it to access the staple cartridge.

2. Remove the Empty Staple Cartridge: Once the front cover is open, carefully pull out the empty staple cartridge from the cartridge holder.

3. Insert the New Staple Cartridge: Take your new staple cartridge and insert it into the cartridge holder, making sure it is securely in place.

4. Remove the Ribbon Securing the Staples: Some staple cartridges may have a ribbon securing the staples in place. Remove this ribbon before closing the front cover.

5. Close the Stapler Front Cover: Finally, close the front cover of the stapler to complete the replacement process.

For more detailed instructions please visit the link below to be taken to Kyocera's Official Support Page.

Adding Staples, Open the Stapler Front Cover