1. Turn off the machine and allow it to cool down if it has been in use to avoid any potential burns.
2. Open the top cover of the printer until it locks in the open position.
3. Carefully remove the toner cartridges and drum unit assemblies from the printer and place them on a clean, flat surface with disposable paper underneath to catch any toner spills.
4. Lift the belt unit by holding the green handle and pull it out of the machine.
5. Remove the old waste toner box by holding its green handle and pulling it out.
6. Unpack the new waste toner box and install it in the machine, ensuring it fits firmly into place.
7. Reinsert the belt unit back into the machine.
8. Reinstall the toner cartridges and drum unit assemblies into their respective slots, matching the toner cartridge color to the same color label on the machine.
9. Close the top cover of the machine.
For more machine specific instructions please visit the link below to be taken to Brother's support page.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article